HOME
*SNARES* BEARING EDGE *HOLEDRILLING* SHELLCUTTING* RECOVERING * HARDWARE * RESTORATION*
Snare Drum Tune-Up
1. Replace batter head with Coated Ambassador
2. Replace resonant head with Hazy Ambassador
3. Replace snare wires with 20 strand stainless
4. Replace snare cord with High-Tension cable
5. Check bearing edges
6. Clean and wax shell
7. Lubricate strainer
8. Lubricate tension rods
9. Set-up and tune
-Good for recording preparation, tour preparation, or just getting that old beater to come alive
-Fast turnaround
-Separate total of parts and labor comes to over $75.00
Special for $60.00
____________________________________________________________________________________________________
DRUM REPAIR PRICING AND LABOR RATES
*Please be aware that these are base prices for average jobs. All final prices will be assessed by one of our technicians and no work will be done until agreed upon between the technician and client.
6” $12.008 16.00
10 20.00
12 25.00
13 28.00
14 32.00
15 35.00
16 40.00
18 46.00
20 52.00
22 60.00
24 70.00
26 80.00
28 95.00
Priced for batter and resonant edges as a pair.
Snare beds are priced at $30.00 per drum in addition to bearing edge cutting.
Different edge profiles are available and we’ll try anything you want.
Strainer and Butt Plate Tom Mounts Spurs Lugs Floor Tom Legs Large holes |
15.00 per set 15.00 per mount 40.00 per pair 2.50 for 2 hole 4.00 for 4 hole25.00 for three 20.00 each |
6-16” 15.00
16-28 25.00
Hole drilling and bearing edge cutting will be required in most cases following cutting and will be priced accordingly.
6” $45.00
8 48.00
10 48.00
12 54.00
13 54.00
14 60.00
15 78.00
16 84.00
18 90.00
20 96.00
22 114.00
24 132.00
26 132.00
28 150.00
Add 15% for Glass Glitter Wraps. Add $50.00 per hour for removal of old finish and hardware, bringing shell to readiness. Materials are not included in the above prices.
Standardized Hardware Repairs:
Bass Drum Pedal Cleaning and Tune Up Hi Hat Cleaning and Tune Up Cymbal or Snare Stand Tune Up Tom Stand or Holder and Bracket Tune Up Snare Drum Tune Cleaning and Tune Up |
30.00 plus parts 30.00 plus parts 15.00 plus parts 20.00 plus parts 35.00 plus parts |
Non-standardized hardware repair or restoration is priced by the hour at $50.00 per hour plus parts.
Non Standardized Drum Repair and Restoration:
-Repair that does not fall into the above categories is priced at $50.00 per hour. This includes cracked shells, bent hoops, etc. and an estimate will be provided.
-Restoration is priced by estimate only with an hourly charge of $50.00. Please note that turnaround time is affected by the availability of sometimes hard to find parts.
-Please note that all prices are for reference purposes; actual pricing for repairs may vary based on the many variables that often occur before and during the process.